Latest ms nut Tenders | Government ms nut Tenders

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government / Public Sector

CTN :45737406

08 Jul, 2026 NA

Kazipet - Telangana

Tender For supply of set of spares for woodward governor of hhp diesel locomotives. set consists of 02 items as follows: 1) locking nuts to wood ward part no.12422, ww nut-3/4 32 jam, qty: 40 nos. 2) three terminal connector to woodward part no.1604-109, ww block-3 section terminal, qty: 10 nos. [ warranty period: 18 months after the date of delivery ] ]

CTN :45720695

20 Jul, 2026 NA

Tikamgarh - Madhya Pradesh

Tender For supply of implant and implant consumable during the year 2026-27 - tens nail ss set, tibia nail ss set, femur nail ss set, proximal tibia plate ss set, distal femur plate ss set, ss wire, k- wire ss, external fixature ss, pfn ss, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper

CTN :45704609

11 Jul, 2026 1.70 Lacs

Mau - Uttar Pradesh

Tender For supply of ms bolt of different size tata make , ms nut different size tata make , gi nut and bolt all sizes tata make , high tensile ms nut bolt unbreko make as per ppl less details show in terms and condition , unbrako make hightensile bolt with nut ht size 7by8x4 , unbrako make hightensile bolt with nut ht size 7by8x312 , unbrako make hightensile bolt with nut ht size 7by8x6 , unbrako make hightensile bolt with nut ht size 3by4x312 , unbrako make hightensile bolt with nut ht size 5by8x4 , unbrako make hightensile bolt with nut ht size 5by8x2 , unbrako make hightensile bolt with nut ht size 1by2x3 , unbrako make hightensile bolt with nut ht size 1x5

CTN :45714215

13 Jul, 2026 2.00 Lacs

Nanpara - Uttar Pradesh

Tender For supply of ms bolt and nut heavy duty full thread all size , ms washer best quailty all size , ms nut all size , spilt pin 1 bata x2 inch , spring washer 1 bata 2 inch , spring washer3 bata 4 inch , ny lock nut 1 inch , ny lock nut 1 1 bata 2 inch , ss hex bolt with nut 10mmx35mm , ss stud 6mm x 50mm , aluminum rivet 6 mm x 40 mm , ss allen key bolt 8mmx20mm , ss allen key bolt 12mmx35mm , ss allen key bolt 19 point 5 mm x50 mm 2 point 5 pitch , ss allen key bolt 12mm x 40 mm , ss allen key bolt 10mm x20mm , ss allen key bolt 14 mmx 50mm , ss allen key bolt 12mmx40mm , ss allen key bolt 14mm x40mm , ss bolt nut full thread 19 point5 mm x65 mm 2 point5 pitch , ss bolt nut full thread 12mm x90mm , ss bolt nut full thread 10 mmx50mm , ss bolt nut full thread 16mm x 50mm , ss bolt nut full thread 8mm x70mm , ss bolt nut full thread 6mmx70mm , ss bolt nut full thread 4mmx70mm , ss bolt nut full thread 8mmx50mm , ss bolt nut full thread 10mmx50mm , ss bolt nut full thread 8mmx 50mm , ss bolt nut full thread 6mmx 50mm , ss bolt nut full thread 4mmx 50mm , ss bolt nut full thread 10mmx35mm , ss bolt nut full thread 8mmx35mm , ss bolt nut full thread 6mmx35mm , ss bolt nut full thread 4mm x 35mm , ss bolt nut full thread 6mm x60mm , ss bolt nut full thread 10mm x65mm , ss bolt nut full thread 8mm x25mm , ss bolt full thread 12mm x65 mm , ss bolt full thread 12mm x50 mm , unbrako make high tension bolt with nut , unbrako make high tension bolt with nut half thread 16mm x150mm , unbrako make high tension bolt with nut half thread 16mm x200mm , unbrako make high tension bolt with nut full half thread 12mm x50mm , unbrako make high tension bolt with nut full half thread 12mm x90mm , unbrako make high tension bolt with nut , unbrako make high tension bolt with nut full thread 8mm x35mm , high tension stud with bolt side nut , high tension stud with bolt side nut 12mm x 45 mm , unbrako make high tension bolt , unbrako make high tension bolt half thread 16mm x 90mm , unbrako make high tension bolt full thread 16mm x 75mm , unbrako make high tension bolt full thread 8mm x 30mm , unbrako make high tension bolt half thread 18mm x 180mm , unbrako make high tension bolt full thread 6mm x 60mm , unbrako make high tension bolt half thread 8mm x 100mm

CTN :45508266

06 Jul, 2026 49.82 Lacs

Indore - Madhya Pradesh

Tender For corrigendum : supply of following items /material/services - insulated smart connector for dtr, insulated smart connector for ptr, male and female contacts for 11 kv ab switch, male and female contacts for 33 kv, ab switch, 33 kv hardware, 11 kv hardware, ms nut & bolt (assorted size), thermovision camera,, lv brass stud 20mm, hv brass stud, silica gel

State Government

CTN :45715272

03 Jul, 2026 NA

Parli - Maharashtra

Tender For procurement of various types of ms nut bolts for unit-7 aoh at bm-1, 250mw, tps, parli-vaijnath.

corporations/Associations/Others

CTN :45492398

30 Jun, 2026 8.73 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of with washer m 12x 30 threaded in inch , ms bolt with nut size m10x 60 , m24 ms bolt with nut half threaded 18x 50 mm threaded in inch , h t nut and bolt with two number plain washer 16x 50 mm , h t bolt with nut double washer 16x 65 mm for door aph grade 10 9 , ms plain washer m 12 washer od 30mm grade 10 9 , ms plain washer od 40 id 16 washer od 45mm use in aph sealing grade 10 9 , h t hex bolt and nut 20x 120 coal pipe coupling bolt round head bolt with nut washer grade 1 09 , ht hex head m 24x 120 coupling bolt round head bolt with nut washer , ht bolt with nut ft with double washer m16x 40 for aph sealing , ht eye bolt with nut size m12x 80 drum separator , h t eye bolt 16 x 90 , hthh half threaded bolt with nut and washer of follo , hex agonal ms bolt with nut and washer m 16x 100 mm qty 50 no , ms hex nut and bolt with washer m 12x 40 mm ft , h t bolt and nut 6 x 30 mm , h t bolt and nut 8x 40 mm , h t allen bolt 10 x 40 mm , h t bolt with nut 12x 65 mm , h t bolt with nut 16x 65 mm , h t nut and bolt size 16x 80mm , h t bolt with nut 20x 80 mm , h t bolt with nut 20 x 100 mm , h t stud with double nut for dss medial hang 38 x 290 mm , stud with double nut for dss lower flange 34 x 270 mm , h t eye bolt m 20 x 120 mm , h t eye bolt m 18 x 70 mm , ht hex head m 24x 120 , ht stud 30x 170 , ss bolt material aisi 304 along with nut and washer size 32x 173 stud with bolt , h t hex bolt and nut m 24x 150 , h t hex bolt and nut 20x 120 , stud with nut m30x 300 , ht stud with double nut 24x 100 mm , h t bolt with nut 24x 100 , ht nut bolt with simple washer 24x 80mm , allen bolt size 12x 65 mm , ms nut and bolt with washer 20x 100 mm , ms bolt with nut 20x 80 mm , brass plug d1 12 mm d2 6mm l 18mm , brass plug d1 22 mm d2 17mm l 28mm , brass plug d1 16 mm d2 11mm l 22mm , brass plug d1 10 mm d2 4mm l 18mm , gear coupling of hd 31 valve actuater , gear of v 7 15 27 v v actuater od 110 , gear of actuater of dish valve of bfp , s s stud with nut 12 x 80

Central Government And Public Sector

CTN :45723982

07 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of depot ferrous scrap - mixed ferrous melting scrap amalgamating various type consisting of melting scrap class mf/10, pl/8, pl/4, mp/3, b/9, b/14, cs/1, cs/2, hf/1, b/10, b/11, mp/6, j/4, db/1,p/4, mp/1, mp/4, sp/3 (small qty. in mixed condition), mp/5, gi & ms nuts and bolts,iron chair and small parts,cbc component with or without rubber attachement,flap door,low grade steel parts of wagon bodies e.g. irs m-44 etc. twin pack draft gear f-325 g, gi rods,brake beam and air reservoir tank,brake cylinders, pipe, including upto 5 kgs cast iron with ms attachments. as available as in the lot. nb - cutting not allowed .

Ms Nut Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

State Government

corporations/Associations/Others

Central Government And Public Sector